Unfortunate fire accident circumstances can seriously harm businesses and operational facilities. Fire suppression systems aid in controlling fire outbreaks to reduce damage and stop their growth. A fire suppression system is an engineered collection of components that may identify fires early on using heat, smoke, and other warning signs. Among all the advantages of a fire suppression system are the following aspects:

  • Early detection and quick response are provided by pre-engineered fire suppression systems.
  • Automated systems guarantee safety and usability (manual modes are available for emergencies).
  • Pre-tested to put out particular sorts of fires efficiently in common hazard circumstances.
  • Intelligent AI ensures the removal of fuel sources to quickly contain the spread of fire


Smoke Detectors:

Smoke detectors are devices that detect smoke and sound an alarm when smoke is present. They are an important part of fire safety and can help alert people to a potential fire before it spreads.

Heat Detectors:

Heat detectors are devices that detect an increase in temperature and sound an alarm when the temperature reaches a certain level.

Multi Detectors:

Multi-sensor detectors, which are created to detect smoke, heat, and/or CO, assist in lowering false alarms by comparing the inputs from various sensors before determining if the source of the input is an actual fire or one of numerous false alarm scenarios.


A sounder is a device used in fire alarm systems to alert people of an emergency. It is usually a loud siren or bell that is triggered by a fire alarm control panel.

Sounder Flasher:

When a fire is detected, sounder flashers are devices that are used in fire alarm systems to deliver both visual and aural alarms that mean it emits an audible alarm and a flashing light, which offers a visual warning.

Manual Call Point (MCP):

It is a button that pressed, triggers an alarm to alert people in the area that there is a fire. It is installed in a visible spot and made to be simple to use in an emergency.

Maintenance Switch:

Every fire suppression system needs regular maintenance and inspections. In order to prevent an unintentional discharge during maintenance, the system can be turned off during inspections using the maintenance switch.

Abort Switch:

When the control unit is in the alarm condition, the Abort Switch is used to briefly block the release circuit signal. The fire suppression system won’t release while the abort pushbutton is depressed.

Manual Release Button:

The button triggers the extinguishing and works with Control Panel FS 5200E. It must be put in place close to the target of the extinguishing. If a true fire condition exists, the forced extinguishing operation using this button can only be initiated following a visual inspection by an authorized person.

Gas Release Switch:

Automatic Release The extinguishing agent container is opened by pushing a button, which opens the cylinder valve that controls it.

Gas Releasing Module:

To prevent unintentional gas emission, the Gas Release Input portion has two inputs. This microprocessor-based gas release module is designed to be used in a variety of gas release automation applications. Applications for CO2, Inergen, and FM-200 can be used using the default/on-site settings.

Pressure switch:

When water runs through dry-pipe, preaction, and deluge systems, some pressure switches—also known as pressure-type flow switches—activate. Damage from excessive or inadequate pressure can be avoided with the aid of others. Flow switches for wet-pipe systems with maintained excess pressure can likewise be used with these switches.


The cylinders are normally placed outside the room they are guarding, which is typically a room for computers or electrical equipment. Despite being electrically disconnected, the actuators still function mechanically, and the cylinder houses high-pressure gases (from 2000 kPa to 20,000 kPa).


It is typically connected to a smoke or heat sensing equipment and utilized as a master valve to electronically trigger the system. An optional blocking mechanism permits pressure-sensitive maintenance.

Addressable Suppression Panel:

When a problem emerges, addressable control panels are fire prevention systems that can quickly detect changes in the environment and pinpoint the specific spot. They are a more advanced system that runs digitally as opposed to analogue like traditional systems.

Conventional Suppression Panel:

The most prevalent sort in business settings, conventional fire alarm panels are more akin to a typical fire protection system. They operate on an analogue system, and despite technological advancements, traditional panels are still the best choice in many situations.

FM200 Gas:

FM200 is a non-flammable gas that’s used to put out fires. Colocation data centers can utilize it since it doesn’t harm electronic equipment, when used properly, it’s safe for people to breathe, and it can be used in enclosed areas.

Novac 1230 Gas:

Novac 1230 fluid swiftly removes heat to put out a fire before it even starts. A typical total flooding system stores the fluid as a liquid in nitrogen-pressurized cylinders. When a fire is just starting, automatic detecting sensors set off a release that puts it out in a matter of seconds.

Inergen Gas:

The Inergen Fire Suppression System provides protection for enclosed spaces where there may be humans present, fires might occur day or night, and conventional agents’ harm cannot be allowed. When released, Inergen agent fills the space and mixes with the air to swiftly and efficiently put out fires.

Piping Network:

A community’s Piping Network is made up of a system of pipes and trenches that deliver water of the right quality and quantity. The piping network’s design, construction, and layout must be carefully planned in order to guarantee that there is sufficient flow pressure to supply hygienically safe water.


VESDA stands for Very Early Smoke Detection Apparatus, give as much advance notice as you can of a potential fire hazard. In order to examine an alarm and launch the proper course of action to stop injury, property damage, or business disruption, VESDA buys time.


Vesda Panel:

The earliest feasible notification of an impending fire threat is provided by VESDA aspirating smoke detection solutions with continuous air sampling. Smoke detectors with VESDA aspiration provide the crucial time needed to examine an alarm and launch the correct action to stop injury, property damage, or business disruption. Even very low levels of smoke can be noticed by VESDA detectors before a fire has a chance to spread since they contain several level alerts and a wide range of sensitivity that does not diminish or alter over time. Additionally, VESDA systems have received certification from regulatory agencies all over the world and are produced using targeted Six Sigma methodology and ISO 9000 standards.

Vesda Pipes And Fittings:

The network of sample pipes that actively carries air from a protected area to the detector is a crucial component in how well a VESDA system performs.

Close My Cart
Close Wishlist
Recently Viewed Close

× How can I help you?