16 results
-
Abort Switch
When the control unit is in the alarm condition, the Abort Switch is used to briefly block the release circuit signal. The fire suppression system won’t release while the abort pushbutton is depressed.
-
Deluge Valve
Deluge Valve, it is used to control water flow in systems that use foam, deluge, and pre-action. The outlet chamber and system pipes are kept dry by the valve being held closed by system water pressure that has been captured in the priming chamber.
75 in stock
-
Electrical PumpRated 5.00 out of 5
Electrical Pump systems are high-pressure water pumps are used to strengthen a building’s ability to combat fires by increasing the pressure in the hydrant service.
100 in stock
-
Fire Fighting Pump
A Fire Fighting Pump in the absence of an electrical power supply, fire pumps have been employed to supply water and pressure to fire prevention systems.
99 in stock
-
Fire Hose Cabinet
A Fire Hose Cabinet guards against contamination and damage. The wall-mounted cabinet is surface- or recess-mounted, has a small footprint to maximize space, and is simple to use.
-
Fire Hose Pipe
A Fire Hose Pipe is a powerful hose used to put out fires by bringing water and other flame-retardants to the scene. Either a fire hydrant or a fire engine can be connected to it.
99 in stock
-
Fire Hose Reel
Fire Hose Reels are put in strategic locations to offer a manageable and accessible supply of water to put out a potential fire risk.
99 in stock
-
Heat DetectorsRated 5.00 out of 5
Heat detectors are devices that detect an increase in temperature and sound an alarm when the temperature reaches a certain level.
38 in stock
-
Hydrant Gate Valve
Hydrant Gate Valves are only used to switch the water on and off. In an emergency, they frequently have a crank handle that makes it much simpler for firefighters to instantly start the water flowing.
-
Hydrant/ Landing Valve
Hydrant/ Landing Valves:Â Simply put, a fire hydrant is a valve-like device that works like your water faucet and releases a steady stream of water when you open it.
-
Jockey PumpRated 5.00 out of 5
A Jockey Pump is a little pump used to keep pressure in the sprinkler pipes of a fire sprinkler system. This is done to make sure that if a fire sprinkler is turned on, there will be a pressure drop, and the jockey pump will turn on to counteract this pressure drop.
-
Maintenance Switch
Every fire suppression system needs regular maintenance and inspections. In order to prevent an unintentional discharge during maintenance, the system can be turned off during inspections using the maintenance switch.
-
Manual Call Point (MCP)
It is a button that pressed, triggers an alarm to alert people in the area that there is a fire. It is installed in a visible spot and made to be simple to use in an emergency.
-
Manual Release Button
The button triggers the extinguishing and works with Control Panel FS 5200E. It must be put in place close to the target of the extinguishing. If a true fire condition exists, the forced extinguishing operation using this button can only be initiated following a visual inspection by an authorized person.
-
Multi Detectors
Multi-sensor detectors, which are created to detect smoke, heat, and/or CO, assist in lowering false alarms by comparing the inputs from various sensors before determining if the source of the input is an actual fire or one of numerous false alarm scenarios.
99 in stock
-
Non-Return Valve
Non-Return Valve;Â when pressure conditions may otherwise result in reversed flow, a NRV is installed to make sure that a medium flows through a pipe in the correct direction.
100 in stock