Deluge Valve
Deluge Valve, it is used to control water flow in systems that use foam, deluge, and pre-action. The outlet chamber and system pipes are kept dry by the valve being held closed by system water pressure that has been captured in the priming chamber.
Deluge Valve, it is used to control water flow in systems that use foam, deluge, and pre-action. The outlet chamber and system pipes are kept dry by the valve being held closed by system water pressure that has been captured in the priming chamber.
Related Products
Fire Hose Reels are put in strategic locations to offer a manageable and accessible supply of water to put out a potential fire risk.
99 in stock
A Fire Fighting Pump in the absence of an electrical power supply, fire pumps have been employed to supply water and pressure to fire prevention systems.
99 in stock
Electrical Pump systems are high-pressure water pumps are used to strengthen a building’s ability to combat fires by increasing the pressure in the hydrant service.
100 in stock
A sounder is a device used in fire alarm systems to alert people of an emergency. It is usually a loud siren or bell that is triggered by a fire alarm control panel.
89 in stock
When a fire is detected, sounder flashers are devices that are used in fire alarm systems to deliver both visual and aural alarms that mean it emits an audible alarm and a flashing light, which offers a visual warning.
99 in stock
It is a kind of digital video camera that utilizes an IP network to deliver and receive picture and control data. It is based on switches and better than Analog Camera.
100 in stock
The temperature rating of the sprinkler is indicated by the colors. The maximum ambient ceiling temperature and the occupancy classification must be taken into account when choosing the sprinkler with the appropriate temperature rating. Sprinklers are actuated by heat, so if the maximum ambient ceiling temperature isn’t taken into account, it could result in unintentional sprinkler activity. The frame arm, deflector, or coating material will typically have some color indicating the temperature rating if the sprinkler does not have a glass bulb.
Sprinklers System are used in fire protection to automatically release water, generally from pipes near the ceiling, to protect a building from fire.
Multi-sensor detectors, which are created to detect smoke, heat, and/or CO, assist in lowering false alarms by comparing the inputs from various sensors before determining if the source of the input is an actual fire or one of numerous false alarm scenarios.
99 in stock
Non-Return Valve; when pressure conditions may otherwise result in reversed flow, a NRV is installed to make sure that a medium flows through a pipe in the correct direction.
100 in stock
The button triggers the extinguishing and works with Control Panel FS 5200E. It must be put in place close to the target of the extinguishing. If a true fire condition exists, the forced extinguishing operation using this button can only be initiated following a visual inspection by an authorized person.
When the control unit is in the alarm condition, the Abort Switch is used to briefly block the release circuit signal. The fire suppression system won’t release while the abort pushbutton is depressed.
Reviews
There are no reviews yet.