Multi Detectors
Multi-sensor detectors, which are created to detect smoke, heat, and/or CO, assist in lowering false alarms by comparing the inputs from various sensors before determining if the source of the input is an actual fire or one of numerous false alarm scenarios.
Multi-sensor detectors, which are created to detect smoke, heat, and/or CO, assist in lowering false alarms by comparing the inputs from various sensors before determining if the source of the input is an actual fire or one of numerous false alarm scenarios.
Related Products
The temperature rating of the sprinkler is indicated by the colors. The maximum ambient ceiling temperature and the occupancy classification must be taken into account when choosing the sprinkler with the appropriate temperature rating. Sprinklers are actuated by heat, so if the maximum ambient ceiling temperature isn’t taken into account, it could result in unintentional sprinkler activity. The frame arm, deflector, or coating material will typically have some color indicating the temperature rating if the sprinkler does not have a glass bulb.
Sprinklers System are used in fire protection to automatically release water, generally from pipes near the ceiling, to protect a building from fire.
A sounder is a device used in fire alarm systems to alert people of an emergency. It is usually a loud siren or bell that is triggered by a fire alarm control panel.
89 in stock
Non-Return Valve; when pressure conditions may otherwise result in reversed flow, a NRV is installed to make sure that a medium flows through a pipe in the correct direction.
100 in stock
A Fire Fighting Pump in the absence of an electrical power supply, fire pumps have been employed to supply water and pressure to fire prevention systems.
99 in stock
Every fire suppression system needs regular maintenance and inspections. In order to prevent an unintentional discharge during maintenance, the system can be turned off during inspections using the maintenance switch.
Electrical Pump systems are high-pressure water pumps are used to strengthen a building’s ability to combat fires by increasing the pressure in the hydrant service.
100 in stock
Hydrant Gate Valves are only used to switch the water on and off. In an emergency, they frequently have a crank handle that makes it much simpler for firefighters to instantly start the water flowing.
Pressure Regulators Valve (PRV); to offer a lower, more usable pressure for distribution in the residence, they automatically lower the high incoming water pressure from the city mains.
A Jockey Pump is a little pump used to keep pressure in the sprinkler pipes of a fire sprinkler system. This is done to make sure that if a fire sprinkler is turned on, there will be a pressure drop, and the jockey pump will turn on to counteract this pressure drop.
Fire Hose Reels are put in strategic locations to offer a manageable and accessible supply of water to put out a potential fire risk.
99 in stock
Deluge Valve, it is used to control water flow in systems that use foam, deluge, and pre-action. The outlet chamber and system pipes are kept dry by the valve being held closed by system water pressure that has been captured in the priming chamber.
75 in stock
Reviews
There are no reviews yet.